What Is the Asbestos Removal Process in Victoria?

Asbestos removal in Victoria is tightly regulated, and for good reason — disturbed asbestos fibres are a serious health hazard. Here's how the process works when it's done properly, so you know what to expect and what to ask for.

1. Assessment and testing

Photographs cannot conclusively identify asbestos. If your home or building was built before 1990, suspect materials — eaves, wall and ceiling sheeting, fences, vinyl flooring, roof cladding — should be assessed, and samples tested by an accredited laboratory where confirmation is needed.

2. Planning and notification

Licensed removalists plan the work, set up the controlled work area, and notify WorkSafe Victoria where the regulations require it. The amount, type (friable or non-friable) and location of the material determine the controls required.

3. Removal and disposal

The material is removed using controlled methods that minimise fibre release, sealed and transported to an EPA-approved facility that accepts asbestos waste. Asbestos can never go in a standard skip or household rubbish.

4. Clearance

After removal, the area is inspected and, where required, a clearance certificate is issued confirming the site is safe for occupation, renovation or demolition.

Get it assessed

NextSite Demolition is licensed and insured for asbestos removal, and our own team carries out the work. Tell us about your property for a free, no-obligation assessment and quote.